One of the most underated, yet essential part of any strut system – are spring nuts.
In strut channel systems, efficiency on-site is everything. Whether it is installing pipework, cable tray or mechanical supports, the difference between a smooth install and a frustrating one often comes down to the small components.
Spring nuts simplify installation and improve positioning, which is why they are widely used across plumbing, HVAC and electrical applications. This guide breaks down exactly what they are, how they work, and when to use them.
(Already familiar with spring nuts? View our step-by-step spring nut installation guide for installation instructions and on-site tips.)
What Are Spring Nuts?


A spring nut is a specialised fastener used within strut channel systems to create a secure threaded connection point.
It typically consists of:
- A threaded nut (commonly M6, M8, M10 or M12)
- A pre-attached spring
- Serrated edges for locking into the channel
The integrated spring holds the nut in place inside the strut channel, allowing installers to position fittings without needing to hold the nut with their hands.
How Spring Nuts Work
Spring nuts are designed for fast, tool-efficient installation.
The process:
- Insert the spring nut into the open face of the strut channel
- Compress slightly to allow entry
- Rotate the nut 90 degrees
- The teeth grip the channel lips, locking it into place
Once installed, the nut provides a stable anchor point for bolts, brackets, pipe clamps or other fittings.
This system removes the need for loose nuts and significantly reduces install time.
Types of Spring Nuts
Not all spring nuts are the same. Choosing the right type depends on the application, size, load requirements and environment.

Short Spring Nut
The Short Spring Nut is compatible with 41x21mm strut channel as the shorter spring allows for easier installation. These are generally for light to medium duty installations due to the smaller strut. Springs are pre-installed into the nut so all you have to do is insert it into the strut channel.
It fits threaded rod including M6, M8, M10 and M12.
All spring nuts are best used together with Flat Washers and Set Screws.

Spring Nut with Stud
This Spring Nut has a pre-threaded bolt (stud) attached to the nut – allowing for direct mounting, without using a screw. This makes it much faster as you do not have to tinker with extra fasteners.
As you can see now, the longer spring means that this is compatible with the 41x41mm strut channel.
With the M10 stud already attached, this product is ideal for applications where direct mounting is required, such as securing pipe clips, brackets and fittings

Long Spring Nut
Long Spring Nuts are used for the most common type of strut channel, which is 41x41mm in size. The long spring variation works the exact same way as the short spring nut, only inside a larger channel.
This is the most commonly purchased variation of the spring nut, with it being common in plumbing, electrical and HVAC installations around Australia.
Types of finishes that are common for long spring nuts include zinc plated, hot dipped galvansied and stainless steel.
Spring Nuts vs Standard Channel Nuts
For most commercial installations, spring nuts offer a clear efficiency advantage.
| Feature/Nut Type: | Spring Nuts | Standard Channel Nuts |
| Installation speed | Fast | Slower |
| Ease of use | Hands-free | Requires holding in place |
| Best for | Overhead / fast installs | Fixed or simple setups |
Common Uses of Spring Nuts
Spring nuts are used across a wide range of applications in strut-based systems:
- Pipe support systems
- Suspended pipework
- Bracket mounting
- Duct supports
- Mechanical services frameworks
- HVAC unit mounting systems
- Cable tray installations
- Conduit supports
- Strut-based framing systems
Video Tutorial
Watch the video below to see how spring nuts are used in installations:
Choosing the Right Spring Nut
Selecting the correct spring nut is important for performance and compliance. Key factors include:
Thread Size
Match the nut to your fixing system (e.g. M8, M10, M12 threaded rod or bolts).
Channel Compatibility
Ensure the nut suits your strut profile (e.g. 41x21mm or 41x41mm).
Material & Finish
- Zinc plated: general use
- Hot dipped galvanised: increased corrosion resistance
- Stainless steel (e.g. 316): harsh or coastal environments
Final Thoughts
Spring nuts are a simple yet essential part of any strut channel system. They provide a fast, secure, and reliable fixing solution for plumbing, HVAC, and electrical installations.
To enquire about Spring Nuts, contact:
📞 02 9620 9999
✉️ sales@ozstrut.com.au
Ozstrut – Australian HVAC & Trade Supply
📍 32 Bearing Rd, Seven Hills NSW 2147
Find out more now!