Spring nuts are one of the fastest and most reliable ways to install fittings, brackets and threaded rod into strut channel systems. Commonly used across plumbing, HVAC and electrical installations, they allow installers to create strong fixing points without drilling or welding. This guide will break down how to use spring nuts with strut channel, for commercial and industrial applications.
Spring Nut Installation Tutorial
The process:
- Insert the spring nut into the open face of the strut channel
- Compress slightly to allow entry
- Rotate the nut 90 degrees
- The teeth grip the channel lips, locking it into place
- Add your selected fitting and fastener to secure to the strut channel.
Once installed, the nut provides a stable anchor point for bolts, brackets, pipe clamps or other fittings.
This system removes the need for loose nuts and significantly reduces install time.
Why People Use Spring Nuts
Spring Nuts are generally used instead of other Channel Nuts as the spring – holds the nut in place. This gives the installer an extra hand to use, making projects faster, easier and less tedious. The spring does not change any performance capacity of the structure – its only benefits are in the installation process.
Selecting the Right Spring Nut
Not all spring nuts are the same. Choosing the right type depends on the application, size, load requirements and environment.

Short Spring Nut
The Short Spring Nut is compatible with 41x21mm strut channel as the shorter spring allows for easier installation. These are generally for light to medium duty installations due to the smaller strut. Springs are pre-installed into the nut so all you have to do is insert it into the strut channel.
It fits threaded rod including M6, M8, M10 and M12.
All spring nuts are best used together with Flat Washers and Set Screws.

Spring Nut with Stud
This Spring Nut has a pre-threaded bolt (stud) attached to the nut – allowing for direct mounting, without using a screw. This makes it much faster as you do not have to tinker with extra fasteners.
As you can see now, the longer spring means that this is compatible with the 41x41mm strut channel.
With the M10 stud already attached, this product is ideal for applications where direct mounting is required, such as securing pipe clips, brackets and fittings

Long Spring Nut
Long Spring Nuts are used for the most common type of strut channel, which is 41x41mm in size. The long spring variation works the exact same way as the short spring nut, only inside a larger channel.
This is the most commonly purchased variation of the spring nut, with it being common in plumbing, electrical and HVAC installations around Australia.
Types of finishes that are common for these nuts include zinc plated, hot dipped galvansied and stainless steel.
Choosing the Right Channel Nut
Selecting the correct nut is important for performance and compliance. Key factors include:
Thread Size
Match the nut to your fixing system (e.g. M8, M10, M12 threaded rod or bolts).
Channel Compatibility
Ensure the nut suits your strut profile (e.g. 41x21mm or 41x41mm).
Material & Finish
- Zinc plated: general use
- Hot dipped galvanised: increased corrosion resistance
- Stainless steel (e.g. 316): harsh or coastal environments
For More Information
Find out more now!
Get in touch with Ozstrut
For any questions, quotes or enquiries, contact OzStrut:
📞 02 9620 9999
✉️ sales@ozstrut.com.au
Ozstrut – Australian HVAC & Trade Supply
📍 32 Bearing Rd, Seven Hills NSW 2147