Wall Mate – Hollow Wall Fastener
Wall mate hollow wall fasteners are designed for securing fixtures to plasterboard and cavity wall systems where there is no solid backing. They provide a reliable fixing solution for light to medium duty applications in commercial and residential installations.
Wall Mate Applications
- Fixing brackets to plasterboard walls
- Mounting light fixtures and service components
- Securing fittings within cavity wall systems
- Electrical and plumbing installations
Suitable Substrates
- Plasterboard
- Hollow cavity walls
- Lightweight partition walls
How Wall Plugs Work
Hollow wall fasteners expand or lock behind the wall surface, creating a secure anchor point within the cavity. This allows fixtures to be installed where traditional solid anchors cannot be used.
Wall Mate Installation Guidance
Select the appropriate fastener size based on wall thickness and load requirements. Always follow manufacturer recommendations and project specifications when installing hollow wall anchors.
Compatibility
Wall Mate hollow wall fasteners are commonly used alongside:
Benefits
- Secure fixing in hollow wall applications
- No access to rear surface required
- Suitable for commercial and residential installations
- Quick and straightforward installation
Wall Mate FAQs
Find answers to common questions about hollow wall fasteners, including suitable applications, installation and compatible screw sizes.
What is a Wall Mate fastener?
A Wall Mate is a hollow wall fastener designed for fixing light- to medium-duty fixtures to gypsum wallboard. Its coarse external thread grips the wallboard, while the centre opening accepts a compatible screw.
What type of wall can Wall Mates be used in?
Wall Mates are designed for use in hollow gypsum wallboard, commonly referred to as plasterboard. They are not intended for fixing directly into solid concrete, masonry or timber.
Do Wall Mate fasteners require predrilling?
No. The one-piece drill-point design allows the Wall Mate to be installed directly into gypsum wallboard without predrilling under normal installation conditions.
What screws are suitable for Wall Mate fasteners?
Ozstrut Wall Mate fasteners are suitable for use with 6–8g screws. The screw length should be selected to suit the thickness of the fixture and the required engagement within the fastener.
How do you install a Wall Mate hollow wall fastener?
Position the Wall Mate at the required fixing point and drive it into the gypsum wallboard using an OZ78PH2 Phillips head driver. Once the fastener sits flush with the wall surface, position the fixture and install a compatible 6–8g screw.
What applications are Wall Mate fasteners suitable for?
Wall Mates are suitable for a range of light- to medium-duty wall-mounted fixtures. Suitability depends on the fixture weight, wallboard thickness, wall condition and installation method.
Contact our team
for more information or to request a quote.











